Description

Kluson® Plus Series Tuning Machines ***Read before ordering. These are for Squier's that have press in bushings in the headstock. If you have hex nut and washer securing the tuner from the front on the headstock these aren't the tuners for your guitar. Thes set replaces the cheap chinese made 2 screw tuners on lower end Squiers. Check to make sure your tuner has 2 screws to mount them on the back of the tuner. These don't replace modern sealed tuners without the use of an adapter bushing. Designed as a drop-in upgrade for your Epiphone® and Squier® guitars with no mods required and an 18:1 gear ratio! There isn't another tuning machine on the market that uses the original bushing size and reverse diagonal mounting screw pattern until now so upgrading your guitar is as easy as it can possibly get. Gear Ratio = 18:1 Gear type = Steel worm/brass ring Format = 6 in line String Post diameter = 6mm String Post height = 1 7/64 in. (28mm) Height of string thru hole center = 59/64 in. (23mm) Construction type = stamped steel Bushing O.D. = 21/64 in. (8.25mm) Bushing I.D. = 6.18mm Button type = Round metal oval Mounting hardware included